Spray nozzle View larger

Spray nozzle

SS-3068-ZBJN

New

The plastering nozzle can also be fitted at the end of the tank or at the end of the pipe knee

A small compressor is sufficient to use the plastering nozzle in plastering modus. It has to provide a pressure between 2 and 3 bars (200-300 kPa or 30-45 psi) for about 80 liters of air consumed per minute. A tank of at least 20 liters is recommended

More details

tax excl. : $34.00
tax incl. : $34.00

More info

2 tips are provided with it: - One with a diameter of 12mm to “charge”. - One with a diameter of 8mm to project grains, in order to have a “rustic” or “crushed” finish. These tips can be fitted at the end of the plastering nozzle.

A quick coupler – compatible with most compressors – is provided with the plastering nozzle (it is in the accessories bag). A corrugated fitting 1/8" is also provided in the accessories bag to directly use an air hose.

The plastering nozzle accepts any king of mortar. However, it is advised to use at max a 3 mm granulometry for a maximal efficiency. Ready to use mortars are compatible (ex: Parex, PRB, Weber, etc.). Their dosage is ideal and assures a continuity in color. It is possible to use your own mortar. It must be unctuous enough so that grains of sand do not agglomerate. Dosage example: 3 volumes of sand 0/2 for 1 volume of hydraulic lime (or 1⁄2 volume of hydraulic lime and 1⁄2 volume of white cement). Some unsuitable sands may require a dosage of 2 volumes of sand for 1 volume of hydraulic lime. Sand / cement mortars may require the addition of a plasticizer to make them softer.

Avis

Grade 
Jonathan 2021-12-28

Super produit

Super produit. Simple d'utilisation. Pratique pour des petites zones à enduire. Pas besoin d'avoir un gros compresseur, pour le faire fonctionner. Maintenant à voir dans le temps. Je recommande. Merci

    Grade 
    JacquesD 2021-11-19

    Buse pour crépir de JacquesD

    Je viens de recevoir cette buse.
    Le résultat est parfait, elle se contente d'un compresseur de bricoleur, même avec la buse de 8mm le débit est suffisant pour des joints assez larges.
    Un seul point noir, cet engin est fait pour les jeunes, à mon âge (78 ans dans très peu de temps), je n'arrive pas à suivre.
    Je n'ai qu'un regret c'est de n'avoir pas connu cette machine plus tôt.
    Bravo, je suis très satisfait.

      Write your review !

      Write a review

      Spray nozzle

      Spray nozzle

      The plastering nozzle can also be fitted at the end of the tank or at the end of the pipe knee

      A small compressor is sufficient to use the plastering nozzle in plastering modus. It has to provide a pressure between 2 and 3 bars (200-300 kPa or 30-45 psi) for about 80 liters of air consumed per minute. A tank of at least 20 liters is recommended

      Write a review